ZoneFlex 7982 Access Point

Zone Flex 7982 Access Point

ÖZEL FİYAT TEKLİFİ ALIN

ZoneFlex 7982

Genel Özellikler

Teknik Spesifikasyonlar

Markalar ve Modeller

Genel Özellikler

For enterprises and carriers requiring increased wireless performance, capacity, unparalleled ease of use and greater business value, particularly within high-density environments, the ZoneFlex 7982 is one of the most reliable and highest performing product in the industry. The ZoneFlex 7982 delivers consistent performance and maintains stable connections within high-capacity environments and to smart mobile devices that constantly change their location and orientation.

The simple variation of a device's orientation can account for up to a 5x performance degradation among Wi-Fi products unable to adapt to such changes. To address these challenges, the ZoneFlex 7982 is the only three-stream 802.11n access point to combine dynamic polarization diversity with adaptive antenna arrays and transmit beamforming to give customers up to a 4x improvement in Wi-Fi performance, signal gain and reception.

Teknik Spesifikasyonlar

Physical Characteristics
Power	DC Input: 12 VDC 1.5A PoE: Compatible with 802.3af/at
Physical Size	20.3 cm / 7.99 In. (L), 20.3 cm / 7.99 In. (W), 5cm/1.97In. (H)
Weight	1kg (2.25 lbs)
RF	Adaptive antenna array that provides 3,000+ unique antenna patterns Physical antenna gain: 3dBi (2.4 and 5GHz) BeamFlex+ SINR Tx gain: up to 6dB BeamFlex+ SINR Rx gain: up to 4dB Interference mitigation: up to 15 dB Minimum Rx sensitivity†: -101 dBm
Ethernet Ports	2 ports, auto MDX, auto-sensing 10/100/1000 Mbps, RJ-45 Power over Ethernet (802.3af/at) with Category 5/5e/6 cable
Environmental Conditions	Operating Temperature: 32°F (0°C) - 122°F (50°C) Operating Humidity: up to 95% non-condensing
Power Consumption	5W (minimum) 7W (typical) 13W (peak)

Performance and Capacity
PHY Data Rates	Up to 450 Mbps per radio
Concurrent Stations	Up to 500 clients per AP
Simultaneous VoIP Clients	Up to 60 (802.11e/WMM support), 30 per radio

Network Architechture
IP	IPv4, IPv6, dual-stack
VLANs	802.1Q (1 per BSSID or dynamic, per user based on RADIUS) Port-based
802.1x for Wired Ports	Authenticator Supplicant
Tunneling	L2TP, PPPoE

Multimedia and Quality of Service
802.11e/WMM	Supported
Software Queues	Per WLAN priority (2), Per traffic type (4), per client
Traffic Classification	Automatic, heuristics and TOS based or VLAN-defined
Rate Limiting	Dynamic per-user or per-WLAN

Management
Deployment Options	Standalone (individually managed) Managed by ZoneDirector Managed by FlexMaster
Configuration	Web User Interface (HTTP/S) CLI (Telnet/SSH), SNMP v1, 2, 3 TR-069 vis FlexMaster
Auto Software Updates	FTP or TFTP, remote auto available

Wi-Fi
Standards	IEEE 802.11a/b/g/n 2.4GHz and 5GHz concurrent operation
Supported Data Rates	802.11n: 6.5 Mbps – 216.7 Mbps (20MHz) 13.5 Mbps – 450 Mbps (40MHz) 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps 802.11b: 11, 5.5, 2 and 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
Radio Chains / Streams	3 x 3:3
RF Power Output††	Max Transmit Power(1) 28 dBm on 2.4 GHz; 26 dBM on 5 GHz
Channelization	20 MHz and/or 40 MHz
Frequency Band	IEEE 802.11n: 2.4 – 2.484 GHz and 5.15 – 5.85 GHz IEEE 802.11a: 5.15 – 5.85 GHz IEEE 802.11b: 2.4 – 2.484 GHz
Operating Channels	US/Canada: 1-11, Europe (ETSI X30): 1-13, Japan X41: 1-13 5 GHz channels: Country dependent
BSSID	Up to 32 per radio (64 total)
Power Save	Supported
Wireless Security	WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i Authentication via 802.1X, local authentication database, support for RADIUS, LDAP, and ActiveDirectory
Certifications†††	U.S., Europe, Canada WEEE/RoHS compliance EN 60601-1-2 Wi-Fi Alliance certified UL 2043 plenum rated
Subway and Railroad Certifications	EN50121-1 EMC EN50121-4 Immunity IEC 61373 Shock & Vibration